{"id":1118,"date":"2022-04-04T07:09:51","date_gmt":"2022-04-04T02:09:51","guid":{"rendered":"https:\/\/greenswamp.org\/?docs=gs-server-overview\/main-tab\/button-control"},"modified":"2022-09-24T16:04:30","modified_gmt":"2022-09-24T11:04:30","slug":"button-control","status":"publish","type":"docs","link":"https:\/\/greenswamp.org\/?docs=gs-server-overview\/main-tab\/button-control","title":{"rendered":"Button Control"},"content":{"rendered":"\n

Park Positions<\/a> \u2013 List of available positions for parking.  The default is two listings \u2018Default\u2019 and \u2018Home\u2019.  Home is same position as the Home button.  Default is a copy of the park position from previous versions of GS.   If you never set the previous version park position then Default will be set to the home position.  Any applications requesting GS to park the mount uses the selected position at the time of the request.  Adding and removing positions is done in the settings area of the Main tab.<\/p>\n\n\n\n

Park Button<\/a> \u2013 move the mount to the defined park position defined within the setup settings.  If mount is current slewing the button will stop the mount.  Click again and the mount will park to the position in the dropdown.<\/p>\n\n\n\n

Home Button<\/a>\u2013 moves the mount to the initial home position which is typically counter weight down and the dec axis pointing to the pole. If mount is current slewing the button will stop the mount. Click again and the mount will move home.<\/p>\n\n\n\n

Stop Button<\/a>\u2013 Stops mount movement<\/p>\n\n\n\n

Tracking<\/a> Button \u2013 turn on or off the selected tracking rate to use.  Will be automatically applied after a slew or goto.<\/p>\n\n\n\n

ReSync\u2013 Resets the mount axes encoder positions to either the home position or a preset park position. The home position is defined as Dec is pointing to the pole and Ra with the counter weights down. When resyncing with a park position make sure the mount is turned on, connected, and in the desired park position.  If not in the correct position, manually move the mount to the desired position and ReSync with that park position.  For encoder accuracy be sure the manual position is as close to the park position as possible.<\/p>\n\n\n\n

Flip SOP Button<\/a> \u2013 moves the mount to the opposite side of the pier.  Works in both directions.<\/p>\n\n\n\n